The current situation of the new crown epidemic is still severe, prevention and control cannot be relaxed, and the task of fighting the “epidemic” is still very arduous. In the prevention and control of the epidemic, the demand for some chemicals has soared and become scarce resource products, such as disinfection chemicals and testing reagents. In order to ensure the supply of the market, major manufacturers are racing against time to carry out production. The use of high-tech pharmaceutical equipment such as fully automatic filling machines and filling production lines has greatly reduced the production pressure of many manufacturers. Lead Fluid has been silently doing his part to support the epidemic prevention and control work. Lead Fluid’s peristaltic pumps and filling system peristaltic pumps play an indispensable role in it.
一. Intelligent dispensing peristaltic pump BT601F
- Three types of working mode: volume dispensing mode, time dispensing mode, copy dispensing mode.
- Calibrating flow function, intelligent temperature-control technology reduces working noise.
- Super anti-interference feature, wide input voltage range, acceptable for the complex power environment.
- Can drive multi-channels and various types of pump heads.
- External foot switch control start-stop for dispensing volume.
二. Microliter peristaltic pump WSP3000
- High filling accuracy，the error is less than ±0.2%.
- Modular design，easy to expand，multiple pumps can be cascaded to form a multi-channel filling system.
- High precision servo motor drive, large torque, free-maintenance，Rotary pressure tube structure, high efficiency.
- The pump tube is low in loss, the continuous service life up to 1000 hours, 12 hours attenuation rate＜1%.
- Suction back function, zero dripping, instant shutdown.
- High clean pipeline, easy to disassemble, easy to clean and sterilize, support CIP and SIP.
- The pipeline is not easy to be blocked, and it can easily cope with materials that are easy to precipitate and have a certain viscosity such as magnetic beads, glycerin, etc.
- It can be operated manually or used with an automatic production line.
三. Peristaltic Pump Filling System
- Provide simultaneous operation of multiple channels, and expand the number of channels through the cascading installation of multiple systems.
- Independent calibration of the filling liquid volume for each channel to meet the customer’s filling accuracy requirements (error ≤±0.5%).
- It can accept the start signal of the filling machine and the stop filling signal for lack of bottles to realize online automatic operation; one filling operation can be controlled by the foot switch to realize stand-alone operation.
- The liquid is only in contact with the hose and not the pump body, there is no valve blockage, and cross contamination is avoided.
- Suitable for abrasive liquids, viscous liquids, emulsions or liquids containing foam, liquids containing a large amount of gas, liquids containing suspended particles.
 |
 |
In the filling of test reagents, there are usually the following requirements:
01 Meet the requirements of filling volume and sterility; high filling precision and high efficiency.
02 The filling system has good stability, no dripping or hanging liquid phenomenon.
03 Can be filled with abrasive liquids or corrosive liquids containing suspended particles.
04 When filling a liquid with biological activity, the biological activity cannot be destroyed.
05 The pump is simple to operate and easy to maintain.
 |
 |
The flow rate range of the above recommended Lead Fluid peristaltic pump products is wide and adjustable, with high liquid filling accuracy and stability, with low shear, it can be used to transport and fill biologically active liquids without inactivation. The liquid in the filling only contacts with the hose, eliminating the risk of cross-contamination, by choosing a corrosion-resistant hose, it can be used for filling various corrosive liquids, and by choosing a wear-resistant hose, it can be used for filling liquids containing solid particles. With different properties of liquids, different filling volume requirements and various functional requirements, single peristaltic pump products or peristaltic pump filling systems can be OEM customized to provide a comprehensive solution; the peristaltic pump does not require valves and seals when filling liquids, and no pump damage caused by dry running, simple operation, easy maintenance, and cost saving.
 |
 |
Lead Fluid has been focusing on the design, development, manufacturing and marketing of peristaltic pumps, and is committed to providing users with high-quality peristaltic pump products and perfect technical services. In addition to having the most complete series of peristaltic pump product lines, Lead Fluid can also provide OEM customized peristaltic pump services according to user needs. Lead Fluid’s complete and mature product development experience can quickly provide you with quick application guidance and suggestions, and provide users with high-quality, high-precision, and cost-effective peristaltic pump delivery solutions.
Group solidarity! Hold together! Fight the epidemic! Overcome the difficulties together! In this war without gunpowder, as long as you strengthen your confidence, you can definitely win! We are full of expectations, looking forward to the dawn of the dawn to dispel the haze of the epidemic, and Lead Fluid will also do his best to help fight the “epidemic”.