Feature
• Suitable for conveying fluids containing corrosive substances, high viscosity, high density, high solid content, or those sensitive to shear force;
• Using multi-layer composite tube, high transmission pressure, up to 10 Bar;
• Flow rate is stable, transmission accuracy is high;
• Fluids capable of being transmitted at temperatures up to 80°C;
• The ability for dry run and self-priming, without the need for a check valve, flushing system, and dry run protection, with a maximum suction lift up to 9 meters;
• Reversible operation, suction or discharge of blockages from the tube;
• Fluids only contact the pump tube, ensuring no contamination throughout the process, and the pump tube can be sterilized with high temperature and high pressure;
• Routine maintenance is simple and generally requires only the replacement of the pump tube.
Technical Parameter
JP100S-10
Tube diameter and length: 10x31x450 (inner diameter x outer diameter x length)
Max flow rate: 1.3 L/min (60rpm)
Traffic per minute: 0.93L
Control mode: Inverter Stepless Speed Regulation (External); Fixed rotational speed (recommended 42rpm, no need for a frequency converter)
Range: 15~120rpm (It is recommended to remain below 60rpm during continuous operation)
Speed resolution: 1Hz (with frequency converter)
Inlet negative pressure: ≤0.9 Bar
Outlet pressure: ≤8 Bar
Fluid temperature: <80°C
Tube material: Natural Rubber (NR) — Standard Configuration; Nitrile Butadiene Rubber (NBR); Ethylene Propylene Diene Monomer (EPDM)
Tube lifespan: 2500~3000 hours ( under normal temperature and pressure, pumping water, 42rpm )
Lubricant consumption: 0.3L
Effective duration of lubricants: Replace together with the tube
Connector specifications: 3/8″ barb fitting (stainless steel 304)
Motor types: Variable frequency motor (standard); Explosion-proof motor (optional, with an explosion-proof rating of EXDIIBT4)
Power supply: Three-phase AC380V, 0.37 KW
Working environment: Temperature 0- 40°C Relative humidity<80%
Degree of protection: IP54
Dimensions(L*W*H): 385×517×307(mm)
The overall weight of the device: 30kg
JP100S-20
Tube diameter and length: 20x36x730 (inner diameter x outer diameter x length)
Max flow rate: 9 L/min (60rpm)
Traffic per minute: 6.3L
Control Mode: Inverter Stepless Speed Regulation (External); Fixed rotational speed (recommended 42rpm, no need for a frequency converter)
Range: 10~100rpm (It is recommended to remain below 60rpm during continuous operation)
Speed resolution: 1Hz (with frequency converter)
Inlet negative pressure: ≤0.9 Bar
Outlet pressure: ≤10 Bar
Fluid temperature: <80°C
Tube material: Natural Rubber (NR) — Standard Configuration; Nitrile Butadiene Rubber (NBR); Ethylene Propylene Diene Monomer (EPDM)
Tube lifespan: 2500~3000 hours ( under normal temperature and pressure, pumping water, 42rpm )
Lubricant consumption: 1L
Effective duration of lubricants: Replace together with the tube
Connector specifications: DN20 Pagoda Joint (Stainless Steel 304)
Motor types: Variable frequency motor (standard)
Explosion-proof motor (optional, with an explosion-proof rating of EXDIIBT4)
Power supply: Three-phase AC380V, 0.75 KW
Working environment: Temperature 0- 40°C Relative humidity<80%
Degree of protection: IP54
Dimensions(L*W*H): LWH 517×385×307(mm)
The overall weight of the device: 50kg
Choose the pump tube according to the characteristics of different materials; the lifespan of a pump tube decreases as the speed increases; the pump tubes made of three different materials have the same lifespan.
Natural Rubber (NR): Commonly used due to its smooth interior and excellent wear resistance, making it suitable for transferring mildly corrosive and slurry-like materials;
Nitrile Butadiene Rubber (NBR): Made via the emulsion polymerization of butadiene and acrylonitrile, this rubber exhibits strong resistance to oils, alkalis, and detergents;
Ethylene Propylene Diene Monomer (EPDM): This material is a copolymer of ethylene, propylene, and a small quantity of non-conjugated dienes. It has outstanding chemical corrosion resistance, making it particularly resistant to substances like ethanol and strong acids.
Flow Table
| Mode | Flow Rate Table JP100S-10B | Flow Rate Table JP100S-20 | ||
| Running state | Speed(rpm) | Flow Rate(L/min) | Speed(rpm) | Flow Rate(L/min) |
| Continuous conditions | 15 | 0.3 | 10 | 1.5 |
| 30 | 0.6 | 30 | 4.5 | |
| 42 (Power Frequency) | 0.93 | 42 (Power Frequency) | 6.3 | |
| 60 | 1.3 | 60 | 9 | |
| Intermittent conditions | 90 | 2 | 80 | 12 |
| (Work for 1 hour, rest for 1 hour) | 120 | 2.6 | 100 | 15 |
Data conditions: Water pumping under normal temperature and pressure; inlet and outlet tubes each 1 meter in length; no height difference between the pump
and the material liquid level.
Dimensions(mm)
Dimensions of JP100S-10B
Dimensions of JP100S-20
Typical Applications
Food industry
Mining sector
Chemical industry
Textile printing and dyeing industry
Animal feed
Beer, wine brewing, beverages
Sewage and Industrial wastewater treatment
Cosmetics industry
Fishery
Recycling
